To help you navigate our blog more easily - this link - https://wherenexthun.blogspot.com/2025/06/how-to-navigate-our-blog.html will take you to a summary page detailing all our blog posts. Clicking on a link will open that post in a new browser window. To return to the home current page just close the browser page and return to the post you were reading beforehand.
Handover day
Handover day for Bryony
was so exciting and rather scary at the same time. One of us slept soundly the
night before. And one of us didn’t! He ran lists of things to check in his head
all night and at 3am typed up a check list of things to go over with the dealer
during the hand over. (See the bottom of this post for our list of things to
check). Other than that, our hand-over day went relatively well but we did do
some ground work before and on the day. Here are our tips:
1. We called up the dealer a few days before the
handover to check that everything was as arranged and that pre delivery checks
had been done and nothing untoward had cropped up.
2. We checked all paper work and the contract before we went so that we understood the terms and conditions. We downloaded the manuals for our motorhome so that we had at least a basic understanding of the systems. Our dealer helpfully emailed us some ‘how to’ videos as well. For Autosleeper owners or prospective owners these can be found at https://www.youtube.com/watch?v=yvodEb4RYgk&list=PLqSjUai73XKk9wXQ2_GBKgZxfFqvWQ7JG
3. We listed all the extras we had asked for, researched
them briefly so that we understood what they looked like and how they should
function and then summarised them on one sheet of paper. We indicated which
were factory or dealer fitted as well.
4. We sorted out insurance – both the general (we
went with Comfort) and also the gap insurance (having searched a range of
providers, our dealers Gap insurance proved to be the best option available). We
were very specific with the insurer about what security features we had on the
boxer cab and the habitation unit along with what was happening at our storage
site.
5. On the day, the dealer insisted on doing the
paperwork first and naively we went along with this. We nearly got caught out! The
tow bar, fitted by someone the dealer recommended, wouldn’t allow our bike rack
to attach to the tow bar. This for us was a major issue and we almost point blank
refused to take away the motorhome. However, because we had already signed the
paperwork beforehand, we couldn’t argue this. Fortunately, the situation was
easily resolved by the tow bar fitter – who fitted a spacer and new tow ball
for only a tenner and then waived labour charges. For those in Devon and
Cornwall, our outstanding tow bar fitter was BMCtowbars. Long story short, we suggest you get out your
checklists, go through the motorhome to check all is as it should be and then
sign the remaining paperwork after that. Certainly, do it before stumping up
any remaining outstanding balance.
6. Our dealer demonstrated how everything works
at a pace we could follow. Do not let your dealer rush you. Ask the questions
you have and then seek clarification if you are still unsure. We asked so many
questions and all were patiently answered. Don’t just get them to demonstrate things
with the electric hook up working, check all gas appliances work as well. Then
unhook the EHU and make sure that the 12v system works – we didn’t do that and
it was a mistake. It has taken us ages to work out how to do everything off
grid.
7. Our dealer was happy for us to video what he
was doing and to pause frequently so we could make notes. And we did. We have
referred to them several times subsequently. It helped that we had done some
reading before hand. A huge blue bag of handbooks was handed over and we
quickly ran through this pack to ensure there was a handbook for every appliance
and additional dealer fitted fixture. Our Peugeot boxer cab handbook was very
disappointing and it is only recently that we have discovered you have to
download the full handbook from the internet!
8. We used YouTube to download instructional
videos relating to our motorhome. We used several to do with the heating panel
and they have been very useful.
9. On our handover day, other than the tow bar
issue, which we describe more fully in our blog post on buying equipment for Bryony,
(go to the section about the Thule velocompact cycle rack) we didn’t find
anything else wrong or untoward and so were happy to drive her off the
forecourt. If you find anything you are not happy with – arrange for it to be
fixed and then arrange a new collection date. Don’t be coerced into driving
away and then having to bring your motorhome back another time. Obviously, it helps
to be close to the dealer you are buying from. Ours is ten miles up the road! Alternatively,
you could get written agreement that any ‘snags’ will be fixed at a later date.
We did that and we also went away almost immediately for a weekend with the dealership
promise that the following week they would put right any issues that cropped
up. (See our post about our first outing to Dartmouth). On
this first trip we soon discovered where the toolkit and towing eye was located.
On the second trip we became very familiar with the fuse box.
10.Before leaving the dealer, we checked
warranties, servicing agreements, habitation check timescales etc. We added
them to our calendar so that we wouldn’t forget them and to ensure no future
warranty claims become invalidated because we missed key deadlines.
Good luck with
collecting your motorhome. Drop us a comment and/or email us a photo of you in
your new pride and joy so we can post it on the blog for others to enjoy and
celebrate. Share a postcard with us when you start going ‘on tour’. In the
meantime, if you think we missed something important off the list above, drop
us a comment and we will amend the list accordingly.
In the meantime,
have fun, stay safe and enjoy your new motorhoming!
Steve and Maggie
(If you would like to find out more about us then visit: https://wherenexthun.blogspot.com/2020/10/welcome-to-our-blog.html
Below are the
things we looked at just before we paid a deposit, when we went to collect Bryony
on hand-over day and on our first overnight trip out to Dartmouth.
Exterior – bodywork
check for scratches, blistering, poor seals at joins of body panels
(couldn’t access roof ad so had to take this on trust). Checked all fittings
and covers to various outlet/inlet feeds on sides. Operated all doors
with keys and made sure that central locking worked – we discovered faults with
both sets of keys programming and activation of alarm etc. Locker door mechanisms
checked and doors correctly sitting in their recess (since then discovered
upper lock on toilet cassette door has broken – being fixe under warranty).
Windows – open
correctly, all catches work, close correctly and sit in recesses perfectly.
Wheels and tyres
– check for tread depth and sidewall damage; check rims and trims for scratches
and fractures; examine for flat spots and that tyres are correct pressures. Spare
wheel – where located, tyre tread and condition, location of wheel changing
tools.
Awning – get
dealer to open it and demonstrate how it works; check for mildew, that legs are
straight and that it extends and retracts cleanly.
Refillable gas
tank – how to switch off the gas supply; check connections and spigots and
dates on any hoses. Where internal gas taps are located. Get dealer to explain
how to fill gas tank. What gas nozzle adapters might be required.
Batteries – how
to charge vehicle battery and how to disconnect it; ditto with habitation
battery; how to use harmony panel and app to check battery charge levels. Jump
start procedures.
Chassis and cab –
jack points and towing eyes, reversing camera and sat-nav. Lights, wipers etc
all working.
Habitation
electric step – check that it retracts at push of button and when engine
starts.
Toilet cassette –
check seals and that flap works. Check condition of cassette and the locker it
sits in. get dealer to demonstrate how to fill toilet cistern.
Electrical –
locate EC700 unit and test trip switches. Locate all fuse banks. Get dealer to
demonstrate 12v and 240v systems. Check all light switches, plugs, USB points.
Switch on all electrical appliance and check they work. Switch on and EHU
procedures. Solar panel charging system and how to switch charging between
batteries. Check that Harmony panel software has been updated to latest
version.
Water and air
blown heating systems – get a demonstration of the Truma and Harmony panels.
Test all heating systems and icons. Check all vents open correctly. How to use
winter tank heaters.
Water system –
find the main drain own switches; check how to fill water tank using both
exterior whale pump and normal hose pipe; get demonstration of using the water
features on the Harmony panel and how to empty the waste water and fresh water
tanks. Check all taps and shower work. Make sure internal water pump is
working.
Cooker – check
that both gas and electric hob bits work. That all oven trays are present. Check
microwave functions.
Fridge – check
that it operates on 12v, gas and 240 EHU.
Cupboards, draws,
lockers and doors – all draws run smoothly, fit and close correctly; ditto with
lockers. Check for loose catches.
Interior – work
all curtains, blinds and screens, making sure they flow/move easily. Check all
cushions are present and in good condition with no marks, wear and tear or
fading.
TV and radio –
remote controls work; TV and bracket fit and move smoothly. TV tunes in
correctly.
Alarms – check
that CO and smoke alarms work; check that any fitted vehicle alarm works when
vehicle is locked.
Paperwork and
manuals – instruction manuals for all appliances and vehicle present; and for
all additional fixtures.
Tracker alarm –
warranty, type fitted, tracker app subscription and registration completed.
Tow bar – fitted
correctly and accepts the bike rack we had (it didn’t and the independent
fitter had to come and add spacers and a new tow ball).



Comments
Post a Comment
Hi, we always look forward to hearing your comments, tips and thoughts. Drop us a line or two below. Take care now. Steve and Maggie